 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SSM6N05FU TOSHIBA Field Effect Transistor Silicon N Channel MOS Type SSM6N05FU High Speed Switching Applications * * * Small package Low on resistance : Ron = 0.8 (max) (@VGS = 4 V) : Ron = 1.2 (max) (@VGS = 2.5 V) Low gate threshold voltage Maximum Ratings (Ta = 25C) (Q1, Q2 Common) Characteristics Drain-Source voltage Gate-Source voltage Drain current DC Pulse Drain power dissipation (Ta = 25C) Channel temperature Storage temperature range Symbol VDS VGSS ID IDP PD (Note1) Tch Tstg Rating 20 12 400 800 300 150 -55~150 mW C C Unit V V mA Note1: Total rating, mounted on FR4 board 2 (25.4 mm x 25.4 mm x 1.6 t, Cu Pad: 0.32 mm x 6) Handling Precaution When handling individual devices (which are not yet mounting on a circuit board), be sure that the environment is protected against electrostatic electricity. Operators should wear anti-static clothing, and containers and other objects that come into direct contact with devices should be made of anti-static materials. 000707EAA1 * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 2000-07-19 1/4 SSM6N05FU Marking 6 5 4 Equivalent Circuit (top view) 6 5 4 DF 1 2 3 1 Q1 Q2 2 3 Electrical Characteristics (Ta = 25C) (Q1, Q2 common) Characteristics Gate leakage current Drain-Source breakdown voltage Drain cut-off current Gate threshold voltage Forward transfer admittance Drain-Source ON resistance Input capacitance Reverse transfer capacitance Output capacitance Switching time Turn-on time Turn-off time Symbol IGSS V (BR) DSS IDSS Vth Yfs RDS (ON) Ciss Crss Coss ton toff VDD = 3 V, ID = 100 mA, VGS = 0~2.5 V VDS = 3 V, VGS = 0, f = 1 MHz Test Condition VGS = 12 V, VDS = 0 ID = 1 mA, VGS = 0 VDS = 20 V, VGS = 0 VDS = 3 V, ID = 0.1 mA VDS = 3 V, ID = 200 mA ID = 200 mA, VGS = 4 V ID = 200 mA, VGS = 2.5 V (Note2) (Note2) (Note2) Min 20 0.6 350 Typ. 0.6 0.85 22 9 21 60 70 Max 1 1 1.1 0.8 1.2 Unit A V A V mS pF pF pF ns Note2: Pulse test Switching Time Test Circuit (a) Test circuit 2.5 V OUT IN 50 10% RL VDD 0V (b) VIN 2.5 V 90% 0 10 s (c) VOUT VDD 10% VDD = 3 V Duty < 1% = VIN: tr, tf < 5 ns (Zout = 50 ) Common Source Ta = 25C VDS (ON) 90% tr ton tf toff Precaution Vth can be expressed as voltage between gate and source when low operating current value is ID = 100 A for this product. For normal switching operation, VGS (on) requires higher voltage than Vth and VGS (off) requires lower voltage than Vth. (Relationship can be established as follows: VGS (off) < Vth < VGS (on) ) Please take this into consideration for using the device. VGS recommended voltage of 2.5 V or higher to turn on this product. 2000-07-19 2/4 SSM6N05FU (Q1, Q2 common) ID - VDS 1000 Common Source 800 10 4 3 2.5 2.3 Ta = 25C 100 1000 Common Source VDS = 3 V ID - VGS (mA) (mA) Drain current ID 2.1 10 Drain current ID 600 Ta = 100C 400 1.9 1 25C -25C 0.1 1.7 200 VGS = 1.5 V 0 0 0.5 1.0 1.5 2.0 0.01 0 0.5 1.0 1.5 2.0 2.5 3.0 Drain-Source voltage VDS (V) Gate-Source voltage VGS (V) RDS (ON) - ID 2.0 Common Source Ta = 25C 1.6 1.6 2.0 RDS (ON) - VGS Common Source ID = 200 mA Drain-Source on resistance RDS (ON) () 1.2 2.5 V 0.8 VGS = 4 V 0.4 Drain-Source on resistance RDS (ON) () 1.2 0.8 Ta = 100C 25C 0.4 -25C 0 0 200 400 600 800 1000 0 0 2 4 6 8 10 Drain current ID (mA) Gate-Source voltage VGS (V) RDS (ON) - Ta 2.0 Yfs - ID Forward transfer admittance Yfs (mS) 5000 Common Source 3000 VDS = 3 V Ta = 25C Common Source ID = 200 mA 1.6 Drain-Source on resistance RDS (ON) () 1.2 2.5 V 1000 0.8 VGS = 4 V 0.4 500 300 0 -25 0 25 50 75 100 125 150 100 10 30 50 100 300 500 1000 Ambient temperature Ta (C) Drain current ID (mA) 2000-07-19 3/4 SSM6N05FU (Q1, Q2 common) IDR - VDS 1000 Common Source VGS = 0 Ta = 25C D 600 G IDR S 400 100 50 30 C - VDS (mA) 800 (pF) Drain reverse current IDR Ciss Capacitance C 10 5 Common Source 3 VGS = 0 f = 1 MHz Ta = 25C 1 0.1 0.3 1 3 10 Coss Crss 200 30 0 0 -0.2 -0.4 -0.6 -0.8 -1.0 -1.2 -1.4 Drain-Source voltage VDS (V) Drain-Source voltage VDS (V) t - ID 1000 Common Source 500 toff 300 400 PD* - Ta Mounted on FR4 board. Ta = 25C tf Drain power dissipation PD* (mW) Switching time t (ns) VDD = 3 V VGS = 0~2.5 V (25.4 mm x 25.4 mm x 1.6 t 2 Cu Pad: 0.32 mm x 6) 300 100 50 30 200 ton tr 10 1 100 3 10 30 100 300 0 0 20 40 60 80 100 120 140 160 Drain current ID (mA) Ambient temperature Ta (C) *: Total rating 2000-07-19 4/4 |
Price & Availability of SSM6N05FU
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |